(a) General Requirements. The utility will furnish the meter and connect its distribution lines with the customer’s service entrance. The wiring equipment, meter base, fuse box, service switch, stand-pipe, and appurtenances shall be furnished by the customer.

(b) Location. The location of the consumer’s service entrance equipment and service connection point will be determined by the utility.

(c) Accessibility of Meter. The utility requires a customer to install his service wiring so that the meter is accessible to utility employees from the outside of the applicant’s building unless special written permission is granted for any other location.

(d) Primary Service. Where primary service is supplied, the customer at his expense and in a manner satisfactory to the utility shall furnish, install, and maintain on his premises such switches, transformers, regulators and other equipment as the utility may deem necessary. The utility will determine whether primary or secondary voltage metering will be installed based on the customer’s load.

(e) Service to Multi-Occupant Building. The customer must arrange the wiring of a multi-occupant building so that the wiring for all stores or apartments will terminate at a common point or points designated by the utility. [Ord. 23-04 § 2 (Att.), 2023. Code 1979 EU § 7.0. Formerly 13.05.070.]